Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
9. Remove throttle cable.
a. Disconnect the throttle cable.
b. Remove the valve body.
10. Remove 2nd brake apply gasket.
INSTALLATION HINT: Replace the used gasket with a new one.
11. Remove shift solenoid valve No.1 and No.2.
a. Remove the 2 bolts and shift solenoid valve No.1.
b. Remove the bolt and shift solenoid valve No.2.
c. Remove the 2 Wrings from the shift solenoid valve No.1 and No.2.
INSTALLATION HINT:
-
Replace the used Wrings with new ones.
-
Coat the 2 new Wrings with ATF and install them to the shift solenoid valve No.1 and No.2.
INSTALLATION
-
Installation is in the reverse order of the previous steps.
INSTALLATION HINT: After installation, fill ATF and check the fluid level.