Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
b. Using a press, install a new bearing.
c. Using a snap ring expander, install a new snap ring.
d. Using SST 09506 - 35010, an extension bar and press, install a new dust cover.
NOTE: The clearance between the dust cover and the bearing should be kept in the range shown in the illustration.
3. Install dust cover:
LH Drive Shaft - Using a press, install a new dust cover.
RH Drive Shaft - Using a press, install a new dust cover until the distance from the tip of the inboard joint shaft to the dust cover falls within the
specification.
