Brake Pad Shim/Fitting Kit Introduction – Technical Service Bulletin BR95003
Brake Pad: All Technical Service Bulletins
Brakes - Introduction of Shim/Fitting Kits
REF.: BRAKES
NO.: BR95-003
DATE: AUGUST 18, 1995
MODEL: ALL MODELS
INTRODUCTION OF BRAKE SHIM KITS & BRAKE FITTING KITS
Full brake kits, with complete hardware, have been discontinued. Shim kits and fitting kits for the front and rear brakes are now available separately,
along with previously released pad kits.
SUPPLY PARTS CHANGES:
PART NUMBER INFORMATION:
For the part numbers of these shim and fitting kits, please consult the most recent Toyota Parts Pricing book.
SERVICE INSTRUCTIONS:
1.
All vehicles are to be inspected to insure that the integrity of the complete brake system is maintained. When replacing worn pads, you should
replace the shims, wear indicators, (wear indicators may be riveted onto pads for some models) and shim grease at the same time using the pad kits
and new shim kit. Vehicles found to need extensive hardware replacement, including anti-squeal springs and support plates, should be repaired
using the pad kit, shim kit and fitting kit, which together include all hardware components.