Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-1304004.png)
c. Set the oscilloscope at 5 V/DIV and 10 ms/DIV, and insert the key in the ignition key cylinder. Check the waveform 1 between the terminal
E7-15 and E8-1 of the ECM.
Standard:
d. Set the oscilloscope at 5 V/DIV and 10 ms/DIV, and insert the key in the ignition key cylinder. Check the waveform 2 between the terminal
E7-27 and E8-1 of the ECM.
Standard:
e. Set the oscilloscope at 2 V/DIV and 10 ms/DIV, and insert the key in the ignition key cylinder. Check the waveform 3 between the terminal
E7-26 and E8-1 of the ECM.
Standard:
