Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-908002.png)
OVERHAUL
1. REMOVE INSTRUMENT PANEL REINFORCEMENT
2. REMOVE BRAKE PEDAL RETURN SPRING
3. REMOVE PUSH ROD PIN
a. Remove the clip and push rod pin.
4. REMOVE BRAKE PEDAL SUPPORT ASSY
a. Disconnect the stop lamp switch connector.
b. Normal type:
Remove the bolt, 4 nuts and brake pedal support assy.
c. Link type: Remove the 4 nuts and brake pedal support assy.
5. REMOVE STOP LAMP SWITCH ASSY
a. Loosen the lock nut and remove the stop lamp switch.
6. REMOVE BRAKE PEDAL SUB-ASSY (NORMAL TYPE BRAKE PEDAL)
a. Remove the nut, bolt and brake pedal sub-assy from brake pedal support sub-assy.
7. REMOVE BRAKE PEDAL PAD
