Camry Sedan L4-2.4L (2AZ-FE) (2003)
Inspection Procedure
1. Remove the engine assembly.
Refer to the applicable model and model year Repair Manual section(s) on the Technical Information System (TIS).
2. Disassemble the engine assembly to gain access to the cylinder block deck cylinder head and manifold mounting surfaces.
Refer to the applicable model and model year Repair Manual section(s) on TIS.
NOTE
If the following specifications are not met, replace the short block assembly.
3. Inspect the cylinder block for flatness.
Using a precision straight edge and feeler gauge measure the surface contacting the cylinder head for warpage.