Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-236003.png)
5. INSPECT WHEEL ANGLE
a. Turn the steering wheel fully and measure the turning angle.
Wheel turning angle
15 inch
16 inch
If the right and left inside wheel angles differ from the specified value, check the right and left rack end lengths.
6. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION
a. Install the camber-caster-kingpin gauge or position vehicle on wheel alignment tester.
b. Inspect the camber, caster and steering axis inclination.
Camber and steering axis inclination
Caster
