Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-253006.png)
o. Install the timing chain on the camshaft timing gear, with the painted links aligned with the timing marks on the camshaft timing sprockets.
p. Examine the front marks and numbers and tighten the bolts in the order shown in the illustration.
Torque:
Bearing cap No. 1 30 Nm (301 kgf-cm, 22 ft. lbs.)
Bearing cap No. 3 9.0 Nm (92 kgf-cm, 80 inch lbs.)
q. Put the camshaft No.2 on the cylinder head with the painted links of chain aligned with the timing mark on the camshaft timing sprockets.
r.
Raising the camshaft, tighten the set bolt temporarily.
s. Examine the from marks and numbers and tighten the bolts in the sequence shown in the illustration.
Torque:
