Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-662004.png)
a. Install the accelerator & brake pedal assy with the 4 nuts and 4 bolts.
Torque:
Nut: 13 Nm (130 kgf-cm, 9 ft. lbs.)
Bolt: 19.1 Nm (194 kgf-cm, 14 ft. lbs.)
b. Connect the accel position sensor connector.
c. Connect the stop lamp switch connector.
34. INSTALL PUSH ROD PIN
a. Install the push rod pin and clip.
HINT: Apply the lithium soap base glycol grease to the parts indicates by arrows.
