Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-758003.png)
2.
Connect the Diagnostic Tester to the vehicle and select ~CURRENT ECU CAL" from the ECU REPROGRAM MAIN MENU." To determine the
vehicle's current ECM (PCM) calibration, see Figure 1 below.
3.
Remove the 10A ECU-IG fuse from the instrument panel Junction Block (refer to Figure 2 for location). This action prevents possible activation
of the ABS relay, resulting in ECM Reprogramming failure.
NOTE:
ECU damage may occur if the 1OA fuse is NOT removed.
