Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-1208001.png)
Clockspring Assembly / Spiral Cable: Service and Repair
Deployment and Disposal
DISPOSAL
HINT: When scrapping vehicle equipped with an SRS or disposing of a steering wheel pad (with airbag), always first deploy the airbag in accordance
with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR
SALES, U.S.A., INC.
CAUTION:
-
Never dispose of a steering wheel pad which has an undeployed airbag.
-
The airbag produces a sizeable exploding sound when it deploys, so perform the operation out-of-doors and where it will not create a nuisance to
nearby residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical
noise.
SST 09082-00700
-
When deploying an airbag, perform the operation at least 10 m (33 ft) away from the steering wheel pad.
-
The steering wheel pad is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a steering wheel pad with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a steering wheel pad with the deployed airbag.
DISPOSING OF STEERING WHEEL PAD WITH AIRBAG DEPLOYED IN COLLISION
Dispose of the steering wheel pad (with airbag).
CAUTION:
-
The steering wheel pad is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
When moving a vehicle for scrapping which has a steering wheel pad with the deployed airbag, use gloves and safety glasses.
-
Use gloves and safety glasses when handling a steering wheel pad with deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a steering wheel pad with deployed airbag.
1. Remove the steering wheel pad from the steering wheel.
2. Place the steering wheel pad in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts disposal.
