Camry Sedan L4-2.4L (2AZ-FE) (2003)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
LH REPLACEMENT
HINT: Replace the RH side by the same procedures with LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor connector and clamp.
b. Remove the 2 clamp bolts holding the sensor harness and clamp from the body and shock absorber.
c. Remove the bolt and speed sensor FR LH.
NOTICE: Do not stick any foreign matter on the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH