Camry Sedan L4-2.4L (2AZ-FE) (2003)
39. CONNECT PRESSURE FEED TUBE ASSY
a. Install the pressure feed tube assy and gasket to the vane pump assy with the union bolt.
HINT: Make sure the stopper of the pressure feed tube touches the pump housing front as shown in the illustration.
b. Using a spanner (27 mm) to hold the pressure port union, torque the union bolt.
Torque: 51.5 Nm (525 kgf-cm, 38 ft. lbs.)
40. CONNECT OIL RESERVOIR TO PUMP HOSE NO.1
a. Connect the oil reservoir to pump hose No.1.
b. Install the clip.
41. INSTALL FAN AND GENERATOR V BELT
SST 09249-63010
42. INSTALL FRONT FENDER APRON SEAL RH
43. INSTALL FRONT FENDER LINER RH
44. INSTALL FRONT WHEEL RH
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
45. BLEED POWER STEERING FLUID
46. INSPECT FLUID LEAK