Camry Sedan L4-2.4L (2AZ-FE) (2003)
/Page-794002.png)
a. Releasing the lock by pressing the slick, disconnect the indicator lamp wire connector from the shift lever plate.
b. Disconnect the indicator lamp from the position indicator housing.
c. Using a screwdriver, release the stopper of the connector.
d. Using a small screwdriver, disengage the locking lug of the terminals 3 and 4, and pull the terminals out from the rear.
e. Disconnect the wire harness from the clamps, and remove the indicator lamp wire.
f.
Remove the indicator lamp cap and indicator lamp bulb from the indicator lamp wire sub-assy.
15. REMOVE FLOOR SHIFT LEVER KNOB SUB-ASSY
a. Lower the position indicator slide cover.
b. Remove the 2 screws and shift lever knob from the shift lever.
16. REMOVE POSITION INDICATOR SLIDE COVER
a. Remove the position indicator slide cover from the shift lever.
17. REMOVE TRANSMISSION CONTROL SWITCH
a. Using a screwdriver, remove the transmission control switch from the shift lever knob.
