Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
-
Check that the stop lights light when the brake ped depressed.
-
After adjusting the pedal height, check and adjust pedal freeplay.
CHECK PEDAL FREEPLAY
-
Stop the engine and depress the brake pedal several times until there is no more vacuum left in the booster.
-
Push in the pedal until the beginning of resistance is felt. Measure the distance, as shown.
Pedal freeplay: 3-6 mm (0.12 - 0.24 in.)
NOTE: The freeplay to the first resistance is due to the play between the clevis and pin, it should be 1-3 mm (0.04-0.12 in.) on the pedal.
ADJUST PEDAL FREEPLAY
-
If incorrect, adjust the pedal freeplay by turning the pedal push rod.
-
Start the engine and confirm that pedal freeplay exists.
-
After adjusting the pedal freeplay, check the pedal height.
-
Install the air duct and instrument lower finish panel.
CHECK PEDAL RESERVE DISTANCE
-
Release the parking brake. With engine running, depress the pedal and measure the pedal reserve distance, as shown.
Pedal reserve distance from asphalt sheet at 50 kg (110.2 lb): More than 85 mm (3.35 in.)
-
If incorrect, troubleshoot the brake system.