Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-375005.png)
d. Using SST, align the timing marks of the LH camshaft pulley and No.3 timing belt cover.
SST: 09278-54012
e. Check that the timing belt has tension between the crankshaft timing and LH camshaft timing pulleys.
11. INSTALL RH CAMSHAFT TIMING PULLEY AND TIMING BELT
a. Remove any oil or water on the RH camshaft timing and No.2 idler pulleys, and keep them clean.
b. Align the installation mark on the timing belt with the timing mark of the RH camshaft timing pulley as shown.
c. Hang the timing belt on the RH camshaft timing pulley, facing the flange side inward.
d. Align the timing marks of the RH camshaft timing pulley and No.3 timing belt cover.
e. Slide the RH camshaft timing pulley on the camshaft.
