Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-261004.png)
b. (RH Camshaft Pulley Position)
Turn the camshaft, align the knock pin hole of the camshaft with the timing mark of the No.3 timing belt cover.
c. (LH Camshaft Pulley Position)
Turn the camshaft timing pulley, align the timing marks of the camshaft timing pulley and No.3 timing belt cover.
10. INSTALL TIMING BELT TO LH CAMSHAFT TIMING PULLEY
a. Check that the installation mark on the timing belt matches the end of the No.1 timing belt cover.
If the installation marks do not align, shift the meshing of the timing belt and crankshaft timing pulley until they align.
b. Remove any oil or water on the LH camshaft timing pulley. and keep it clean.
c. Using SST. slightly turn the LH camshaft timing pulley clockwise. Align the installation mark on the timing belt with the timing mark of the
camshaft timing pulley, and hang the timing belt on the LH camshaft timing pulley.
SST: 09278-54012
