Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
16. INSTALL EMISSION CONTROL VALVE SET
(a) Install the emission control valve set with the two bolts.
(b) Connect the two VSV connectors.
(c) Connect the two vacuum hoses of the IACV VSV.
(d) Connect the two vacuum hoses of the fuel pressure control VSV.
(e) Connect the EGR gas temp. sensor connector clamp to the emission control valve set.
17. INSTALL V-BANK COVER
Using a 5 mm hexagon wrench, install the V-bank cover with the two nuts.
18. INSTALL AIR CLEANER CAP, AIR FLOW METER AND AIR CLEANER HOSE
(a) Connect the air cleaner hose, and install the air cleaner cap and air flow meter with the four clips.
(b) Tighten the air cleaner hose clamp bolt.
(c) Connect the air hoses.
(d) Connect the coil cord clamp.
(e) Connect the air flow meter connector.
19. (A/T) CONNECT THROTTLE CABLE, AND ADJUST IT
20. CONNECT ACCELERATOR CABLE, AND ADJUST IT
21. FILL WITH ENGINE COOLANT
22. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY