Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-830001.png)
Engine RPM Sensor (NE signal): Testing and Inspection
Check That Spark Occurs
- Disconnect the high-tension cord from the distributor.
- Hold the end approx. 12.5 mm (0.50 in.) from the body of vehicle.
- See if spark occurs while engine is being cranked.
HINT: To prevent gasoline from being injected from injectors during this test, crank the engine for no more than 1 - 2 seconds at time.
- If the spark does not occur, refer to chart:
Diagnosis By Symptom
