Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
Air Bag Control Module: Service and Repair
Center Airbag Sensor Assembly Removal And Installation
NOTICE:
-
Do not open the cover or the case of the ECU and various computers unless absolutely necessary. (If the IC terminals are touched, the IC may be
destroyed by static electricity.)
-
Never use SRS parts from another vehicle. When replacing parts, replace with new parts.
-
Never reuse the center airbag sensor assembly involved in a collision when the airbag has deployed.
-
Never repair a sensor in order to reuse it.
Remove And Install Center Airbag Sensor Assembly
1. Remove these parts.