Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-1420001.png)
Clockspring Assembly / Spiral Cable: Service and Repair
SRS Clockspring/Spiral Cable Removal and Installation
Component Overview
REMOVAL
1.
Disable airbag system, refer to Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair
2.
Position front wheels straight ahead.
3.
Using a T30 Torx wrench, remove steering wheel pad attaching screws.
4.
Pull steering pad rearward, then disconnect airbag electrical connector.
5.
Place installation alignment marks on steering wheel and main shaft.
6.
Remove steering wheel.
7.
Remove spiral cable from combination switch.
Wiring Cover Harness Pt 1
(a) Remove two screws from wire harness
