Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
Headlamp Switch: Service and Repair
Removal/Installation
1.
On models equipped with airbags, disarm airbag system as outlined under MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING.
2.
On models less airbag, disconnect battery ground cable.
3.
On all models, remove steering wheel as outlined under STEERING SUSPENSION CHASSIS AND BODY
COMPONENTS/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/STEERING WHEEL.
4.
Remove steering column upper and lower covers.
5.
Remove combination switch.
6.
Reverse procedure to install.