Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-902003.png)
c. Using SST. press in the bearing until slightly play between the bearings.
SST 09350 - 32014 (09351 - 32120)
HINT: Hold the ring gear to prevent it from falling.
6. INSTALL INTERMEDIATE SHAFT BEARING
Using SST. press in the bearing until it slightly touches the front bearing of the counter drive gear.
SST 09350 - 32014 (09351 - 32120)
HINT: The counter drive gear can be turned lightly.
7. PLACE NEW LOCKING WASHER
8. INSTALL ADJUSTING NUT AND ADJUST PRELOAD OF COUNTER DRIVE GEAR
a. Hold the overdrive planetary gear in a vise with soft jaws.
b. Using SST, tighten the adjusting nut until the following gear starting load is reached on the tension gauge.
