Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
1. INSTALL OIL SEAL RINGS ON OVERDRIVE CASE
Spread the two rings apart and install them into the groove.
HINT: After installing the oil seal rings, check that they move smoothly.
2. INSTALL CO ACCUMULATOR PISTON TO OVERDRIVE CASE
a. Install a new O-ring to the accumulator piston.
b. Coat the O-ring with ATF.
c. Install the accumulator piston, two springs and retaining plate.
d. Using snap ring pliers, install the snap ring.
OVERDRIVE BRAKE ASSEMBLY
1. INSTALL PISTON INTO DRUM