Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-934001.png)
Throttle Valve Cable/Linkage: Adjustments
THROTTLE CABLE INSPECTION AND ADJUSTMENT
-
Depress the accelerator pedal all the way and check that the throttle valve opens fully.
HINT: If the throttle valve does not open fully, adjust the accelerator link.
-
Fully depress the accelerator.
-
Loosen the adjustment nuts.
-
Adjust the outer cable so that the distance between the end of the boot and stopper on the cable is the standard.
Standard boot and cable stopper distance:
0 - 1 mm (0 - 0.04 in.)
-
Tighten the adjusting nuts.
-
Recheck the adjustments.
