Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
NOTICE: Cover the drive shaft boot with cloth to protect it from damage.
-
Push the front axle hub toward the outside of the vehicle, and separate the drive shaft from the axle hub.
9. REMOVE LH DRIVE SHAFT
-
Using hub nut wrench and hammer handle or an equivalent, pull out the drive shaft as shown.
-
Using a screwdriver, remove the snap ring.
10. REMOVE RH DRIVE SHAFT
-
Remove the bearing lock bolt.