Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
1. (RH DRIVE SHAFT)
ASSEMBLE CENTER DRIVE SHAFT
-
Install a new snap ring to the center drive shaft.
-
Using a press and extension bar, press in a new bearing.
-
Using a snap ring expander, install a new snap ring.
-
Using a press, press in a new drive shaft side dust cover.
HINT: The clearance between the dust cover and the bearing should be kept in the range shown in the illustration.
-
Using a press, press in a new transaxle side dust cover.
2. (LH DRIVE SHAFT)
ASSEMBLE SIDE GEAR SHAFT
-
Using a press, press in a new dust cover.