Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-999008.png)
b. Install the four pinions and thrust washers to the spider.
c. Install the side gear and spider with four pinions to the differential left case.
d. Using a dial indicator, measure the backlash of one pinion gear while holding the No.2 differential case.
Standard backlash: 0.05 - 0.20 mm (0.0020 - 0.0079 in.)
HINT: Push the pinion gear and spider with four pinions to the right side a of the left side of the differential case.
e. Install the side gear and spider with four pinions to the right side of the differential case. Check the side gear backlash.
f.
Referring to the image, Select the thrust washer which will ensure that the backlash is within specification. Try to select a washer of the same
size.
g. Install the speedometer drive gear.
