toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < Shift Lever and Control Cable|Page 2595
Page 1
background image

Shift Linkage: Adjustments

Fig. 6  Transaxle Select Lever, Viscous Mode. Models w/Viscous Coupling Transaxle

Fig. 7  Transaxle Select Lever, Viscous Free Mode. Models w/Viscous Coupling Transaxle

Fig. 8  Transaxle Select Lever, FF Mode. Models w/Viscous Coupling Transaxle

1.

Viscous mode. This mode is during normal driving. After completing inspection and or service to the vehicle, return the mode switch to position
shown in Fig. 6.

2.

Viscous free mode. This mode cuts off the driving force transmitted from the center differential to the control coupling, and makes the center
differential free, Fig. 7. Never use this mode during normal vehicle operation.

3.

OFF mode. This mode cuts off the driving force transmitted from the center differential to the transfer unit and locks the center differential.
However, when the lever is shifted to this mode, the driving force is transmitted only to the front wheels, Fig. 8. Do not use this during normal
driving.

Relays and Modules - Transmission and Drivetrain > < Shift Lever and Control Cable|Page 2595