Camry Sedan V6-180.5 2959cc 3.0L DOHC (3VZ-FE) (1992)
/Page-1006003.png)
b. Remove the select inner lever, No.1 compression spring and No.1 select spring seat.
4. REMOVE SNAP RING
Using two screwdrivers and a hammer, remove the snap ring.
5. REMOVE CONTROL SHAFT COVER AND DUST BOOT
a. Remove the control shaft with dust boot from the shaft.
b. Remove the dust boot from the control shaft cover.
6. IF NECESSARY, REPLACE CONTROL SHAFT COVER OIL SEAL
a. Using a screwdriver, pry out the oil seal.
