Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
/Page-924001.png)
Fuel Pressure Regulator: Service and Repair
PROCEDURE
Removal
1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal
cable is disconnected from the battery.
2. Disconnect vacuum sensing hose from fuel pressure regulator.
3. Disconnect fuel return hose from fuel pressure regulator.
CAUTION: Put a shop rag under the pressure regulator.
4. Remove Fuel Pressure Regulator.
^
Remove the 2 bolts. and pull out the pressure regulator.
^
Remove the 0-ring from the pressure regulator.
Installation
1. Install fuel pressure regulator.
