Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
6. Connect Hydraulic Motor Pressure Pipe Connect the pressure pipe to the air intake chamber and water inlet with the 2 bolts.
Torque: 8 Nm (69 in lb)
7. Install No.2 Egr Pipe.
^
Install 2 new gaskets and the EGR pipe with the 4 nuts.
Torque: 12 Nm (9 ft lb)
8. Install Emission Control Valve Set.
^
Install the emission control valve set with 2 bolts.
Torque: 8 Nm (69 in lb)
^
Connect the following connectors:
Vacuum Switching Valve (VSV) connector for Acoustic Control Induction System (ACIS); 1
VSV connector for EGR; 2
VSV connector for fuel pressure control; 3