Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
^
Using an ohmmeter, measure the resistance between the terminals +B and HT.
Resistance: 11 - 16 Ohms at 20°C (68°F)
^
If the resistance is not as specified, replace the Main Heated Oxygen Sensor.
Torque: 44 Nm (31 ft lb)
3. Reconnect the Main Heated Oxygen Sensor connectors.
4. Reconnect negative (-) terminal cable to battery.
NOTE: This test is designed to inspect the heater of the Main Heated Oxygen Sensor and does not test Sensor output. For further testing or in case
of existing Data Trouble Codes, refer to Data Trouble Code Charts.