Camry Sedan 2-Door V6-3.0L (1MZ-FE) (1994)
/Page-1400005.png)
(b) Install the coil spring to the shock absorber.
HINT: Fit the lower end of the coil spring into the gap of the spring lower seat.
4. INSTALL UPPER INSULATOR AND SUSPENSION UPPER SUPPORT
(a) Light coat lithium or silicon based grease to the upper insulator and suspension upper support, as shown in the image.
(b) Install the upper insulator to the suspension upper support.
HINT: Match the bolt of the suspension upper support with the cut-off part of the insulator.
(c) Install the suspension upper support to the piston rod.
(d) Using SST to hold the suspension upper support, install a new nut. SST 09729-20031
Torque: 49 N.m (500 kgf.cm, 36 ft.lbf)
(e) Rotate the suspension upper support and set it in the direction shown in the image.
