Camry Sedan 2WD L4-2.0L (3S-FE) (1988)
(d) Install the water pump with the three bolts. Torque the bolts in the sequence shown.
Torque: 95 kg-cm (82 in.lb, 9.3 N-m)
(e) Install the two nuts holding the pump cover to the water by-pass pipe.
Torque: 95 kg-cm (82 in.lb, 9.3 N-m)
3. Install pulleys and timing belt
4. Connect radiator lower hose
5. Connect water temperature switch connector
6. Fill with engine coolant