Camry Sedan 2WD L4-2.0L (3S-FE) (1988)
/Page-206001.png)
Fuel Pressure Release: Service and Repair
FUEL PRESSURE RELEASE
-
Disconnect the cable from the negative (-) terminal of the battery.
-
Disconnect the cold start injector connector.
-
Put a suitable container or shop towel under the cold start injector pipe.
-
Slowly loosen the union bolt on the cold start injector.
-
Retighten cold start injector union bolt.
Torque: 180 kg.cm (13 ft.lb, 18 N.m)
-
Wipe off any splattered gasoline.
-
Reconnect the battery negative (-) cable.
