Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVE MASTER CYLINDER
-
Disconnect level warning switch connector
-
Take out fluid with syringe
CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.
-
Disconnect brake tubes
-
Using Special Service Tool (SST) #09751-36011, disconnect brake tubes from the master cylinder.
-
Remove the three nuts and 3-way union.
-
Remove the clamp.
-
Remove the master cylinder from the brake booster and remove the gasket.