Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
/Page-1284004.png)
CAUTION: The snap ring should be installed so that its R-shape looks up.
c. Using SST 07110-61050 and torque wrench, fasten the magnetic clutch lead wire to the cylinder block.
Torque: 3.4 Nm (30 in. lb)
2. Install rotor.
a. Install the rotor on the compressor shaft.
b. Using SST 07114-84020 install the new snap ring.
CAUTION: The snap ring should be installed so that its R-shape looks up.
3. Install pressure plate.
