Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
/Page-873011.png)
b. Place SST on the spring retainer, and compress the return spring with a shop press.
SST 09350-32014 (09351-32070)
c. Install the snap ring using snap ring pliers. Be sure the end gap of snap ring is not aligned with the spring retainer claw.
3. INSTALL PLATES, DISCS AND FLANGE
a. Install plates and discs.
Install in order: P = Plate D = Disc
P-D-P-D-P-D
b. Install the flange with the flat end facing downward.
4. INSTALL SNAP RING
Check that the end gap of the snap ring is not aligned with one of the cutouts.
