Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
/Page-874005.png)
a. Install the two new O-rings to the piston.
b. Coat the O-rings with ATF.
c. Press the piston into the drum with the cup side up, being careful not to damage the O-rings.
3. INSTALL PISTON RETURN SPRINGS
a. Place the eighteen springs, spring retainer and snap ring onto the piston.
b. Place SST on the spring retainer, and compress the springs with a shop press.
SST 09350-32014 (09351-32070)
c. Install the snap ring with snap ring pliers.
Be sure the end gap of the snap ring is not aligned with the spring retainer claw.
4. INSTALL PLATES, DISCS AND FLANGE
a. Install the plates and discs.
Install in order: P = Plate D = Disc
