Camry Sedan 2WD V6-2507cc 25L DOHC A140E & A140L Fluid Pump Service & Repair
4. CHECK OIL PUMP BODY BUSHING
Using a dial indicator, measure the inside diameter of the oil pump body bushing.
Maximum inside diameter: 38.18 mm (1.5031 in.)
If the inside diameter is greater than the maximum, replace the oil pump body subassembly.
5. CHECK STATOR SHAFT BUSHING
Using a dial indicator, measure the inside diameter stator shaft bushing.
Maximum inside diameter: 21.57 mm (0.8492 in.)
If the inside diameter is greater than the maximum, replace the stator shaft.
ASSEMBLY OF OIL PUMP
1. INSTALL FRONT OIL SEAL
Using SST and a hammer, install a new oil seal. The seal end should be flush with the outer edge of the pump body.
SST 09350-32014 (09351-32140)