Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
/Page-893021.png)
c. Install the cushion plate facing the rounded end upward.
3. INSTALL PISTON RETURN SPRING
4. INSTALL SNAP RING INTO CASE
Be sure the end gap of the snap ring is not aligned with one of cutouts.
5. INSTALL OVERDRIVE GEAR ASSEMBLY ONTO CASE
While turning the overdrive gear clockwise, install the overdrive gear assembly to the case.
If the overdrive gear assembly is properly installed to the overdrive case, the clearance between them will be about 24 mm (0.94 in.).
