Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
c. Install the one-way clutch into the overdrive planetary gear.
HINT: Be sure that the one-way clutch is installed in the correct direction.
d. Install the retaining plate.
e. Install the snap ring.
12. CHECK OPERATION OF O/D ONE-WAY CLUTCH
a. Install the overdrive direct clutch into the one-way clutch.
b. Hold the overdrive direct clutch and turn the intermediate shaft. The shaft should turn freely clockwise and should lock counterclockwise.
c. Remove the overdrive direct clutch.
DISASSEMBLY OF OVERDRIVE CASE
1. REMOVE C0 ACCUMULATOR PISTON FROM OVERDRIVE CASE
a. Using snap ring pliers, remove the snap ring.