Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
2. SEPARATE ONE-WAY CLUTCH AND PLANETARY GEAR
3. REMOVE THRUST WASHERS
Remove the two thrust washers from the both sides of planetary gear.
4. REMOVE ONE-WAY CLUTCH FROM OUTER RACE
a. Remove the two snap rings and retainers from the both sides.
b. Remove the one-way clutch from the outer race.
INSPECTION OF REAR PLANETARY GEAR
MEASURE PLANETARY PINION GEAR THRUST CLEARANCE
Using a feeler gauge, measure the planetary pinion gear thrust clearance.
Standard clearance: 0.20 - 0.50 mm
(0.0079 - 0.0197 in.)
ASSEMBLY OF ONE-WAY CLUTCH
1. INSTALL ONE-WAY CLUTCH