Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
/Page-895008.png)
4. INSTALL THRUST WASHERS
a. Coat the two thrust washers with petroleum jelly.
b. Align the tab of the washers with the hollow of the carrier.
REPLACEMENT OF RING GEAR FLANGE
1. REMOVE RING GEAR FLANGE
a. Using a screwdriver, remove the snap ring.
b. Remove the flange from the ring gear.
2. INSTALL RING GEAR FLANGE
a. Position the flange into the ring gear.
b. Using a screwdriver, install the snap ring.
