Camry Sedan 2WD V6-2507cc 2.5L DOHC (2VZ-FE) (1990)
b. Install the oil strainer onto the gasket.
8. INSTALL UPPER VALVE BODY COVER
a. Position the upper valve body cover.
b. Install and finger tighten the nine bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
9. INSTALL SOLENOIDS
a. Install the new O-rings on the solenoids.
b. Install the No.1 and No.2 solenoids.
c. Install and finger tighten the three bolts.
HINT: Each bolt length (mm (in.)) is indicated in the figure.
10. TIGHTEN BOLTS OF UPPER AND LOWER VALVE BODIES
a. Tighten the sixteen bolts in the lower valve body.
Torque: 55 kg-cm (48 in.-lb., 5.4 N.m)