toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wiper Pivot > < Wiring - Double Locking Type Connector 305 & 250 Series|Page 4832
Page 1
background image

Wiper Motor: Service and Repair

FRONT

1.

On models equipped with airbags, disarm airbag system as outlined under MAINTENANCE PROCEDURES/AIRBAG SYSTEM
DISARMING.

2.

On models less airbags, disconnect battery ground cable.

3.

On all models, disconnect wiper motor wire connector, then remove wiper motor service cover, if equipped.

4.

Remove wiper motor attaching bolts.

5.

Using a screwdriver disconnect wiper link from wiper motor and remove wiper motor.

6.

Reverse procedure to install.

REAR

1.

Disconnect battery ground cable.

2.

Remove wiper arm and rear door trim cover.

3.

Disconnect wiper motor wire connector.

4.

Remove wiper motor bracket attaching bolts and wiper motor and bracket.

5.

Reverse procedure to install.

Wiper Pivot > < Wiring - Double Locking Type Connector 305 & 250 Series|Page 4832