toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Intake Manifold|Installation|Page 1564 > < Intake Manifold|Installation|Page 1562
Page 4
background image

16.

Disconnect two air hoses from P/S pump.

Removal Of Three Bolts, Wire Clamp, And Air Tube

17.

Remove three bolts, wire clamp and air tube.

Disconnecting Engine Ground Wire From Intake Manifold

18.

Disconnect engine wire ground strap from intake manifold.

19.

Disconnect knock sensor and EGR VSV connectors.

Removal Of Intake Manifold

20.

Remove intake manifold as follows:
a. Remove four bolts, No.1 air intake chamber and manifold stays.
b. On California models, remove wire bracket.

Removing The Six Bolts For Intake Manifold

c. Remove six bolts, two nuts, intake manifold and gasket.

Intake Manifold|Installation|Page 1564 > < Intake Manifold|Installation|Page 1562