Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Evaporator Core: Service and Repair
EVAPORATOR REMOVAL
Installation is in the reverse order of removal.
1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM
INSTALLATION HINT: Evacuate air from refrigeration system.
Charge system with refrigerant and inspect for leakage of refrigerant.
Specified amount: 850 ± 50 g (29.98 fl.76 oz.)
2. REMOVE BLOWER UNIT See: Blower Motor
3. REMOVE EVAPORATOR COVER
(a) Remove the 2 bolts for the liquid and suction tube.
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
INSTALLATION HINT: Lubricate the new 0-rings with the compressor oil and install the tubes.
(b) Remove the 8 screws and evaporator cover.
4. REMOVE EVAPORATOR
(a) Pull and remove the evaporator.
INSTALLATION HINT: If evaporator was replaced, add compressor oil to compressor.
Add 40 cc (1.4 fl.oz.)
Compressor oil: ND-OIL 8 or equivalent