Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Distributor: Service and Repair
Removal and Installation
California Spec. Vehicles
REMOVAL PROCEDURES
1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must not be started for at least 90 seconds from the time the ignition switch is turned to the "LOCK" position and the negative
(-) terminal cable is disconnected from the battery.
2. Disconnect accelerator cable From throttle body.
3. Remove air cleaner cap, resonator and air cleaner hose.
-
Disconnect the intake air temperature sensor connector.
-
Disconnect the air hose from the air cleaner hose.
-
Loosen the air cleaner hose clamp bolt.
-
Disconnect the 4 air cleaner cap clips.
-
Disconnect the air cleaner hose from the throttle body, and remove the air cleaner cap together with the resonator and air cleaner hose.
4. Disconnect distributor connector.
5. Disconnect high-tension cord from ignition coil.
6. Disconnect high-tension cords from spark plugs.
-
Disconnect the high-tension cords from the cord clamps.
-
Disconnect the 4 high-tension cords from the spark plugs.